Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil service in the Fiat Toro?

Model: Fiat Toro MK 1 - Years 2016-2024
Part: Service warning light

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Posted on 17 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil service in the Fiat Toro?
How to reset the oil service in the Fiat Toro?
Fiat Toro (2016-2024 / MK 1) In this tutorial we can see how to reset the engine oil service in the Fiat Toro, an extremely simple and fast operation. Before proceeding, make sur…
How to reset the oil service warning light in Fiat Toro?
How to reset the oil service warning light in Fiat Toro?
Fiat Toro (2016-2024 / MK 1) In this tutorial we can see how to reset the engine oil service light in the Fiat Toro. Before carrying out this quick and easy operation, make sure …
How to reset the oil light on Fiat Toro
How to reset the oil light on Fiat Toro
Fiat Toro (2016-2024 / MK 1) In this video tutorial we can see how to reset the oil warning light on a Fiat Toro by following a few simple steps that will guide you towards corre…

Other guides you may be interested in

How to Replace the Diesel Filter on a Dacia Duster

Let's see how to replace the diesel filter on a Dacia Duster. Start by removing the plastic cover at the bottom of the bumper with a suitable screwdriver (remove the circle), then reach the front headlamp located in the bumper (as shown in the video). After removing the container, take out the filter inside and fit a new one (same size). Refit the container and the plastic cover under the car's bumper with the attached clips. Test the proper functioning. Refit the front circle with the securing clips and lower the car.

Watch the video!


by ScegliAuto

More videos