Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to mount the glovebox on the Fiat Qubo?

Model: Fiat Qubo MK 1 - Years 2008-2019
Part: Glove compartment

When you go to mount a new glove box on the Fiat Qubo you have to start with the five iron clips. These must be aligned with their seat where they are inserted by interlocking, making a slight pressure. Once this part has been fixed, we can go to insert and tighten the six torx screws of the glovebox: there are three on the back and three on the bottom. It is recommended to start with the upper ones, leave them a little loose in order to have greater mobility of the glovebox to correctly position the lower screws and then go back to fully tighten the upper ones.

Posted on 19 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Pollen Filter on Fiat Qubo
How to Remove the Pollen Filter on Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) Let's see how to remove the pollen filter on the Fiat Qubo (Fiorino). Open the glove compartment and unclip the plastic guides (retaining screws), th…
How to replace the cabin air filter of the Fiat Qubo.
How to replace the cabin air filter of the Fiat Qubo.
Fiat Qubo (2008-2019 / MK 1) In the following guide, you will find a description of the procedure to independently replace the cabin air filter of your Fiat Qubo. First, purchase…
How to Replace the Pollen Filter in a Fiat Qubo
How to Replace the Pollen Filter in a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) To replace the pollen filter in a Fiat Qubo, open the glove compartment. Start by removing the securing pins with a socket wrench. Once this is done,…

Removing the Ignition Switch from a Mercedes C-Class W204

In this short video, you will see how to remove the ignition switch from a Mercedes C-Class (Mercedes W204). First, remove the chrome trim (if present) around the ignition switch by prying it off with a screwdriver (preferably something soft to avoid damaging the dashboard). Next, remove the plastic trim around the gauge cluster where the tachometer and speedometer are located, as well as the rectangular plastic trim surrounding the steering wheel. Simply unclip it. Now, press and push the ignition switch to release it from the housing, and you're done!

Watch the video!


by ScegliAuto

More videos