Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Steering Rack Boot

Model: Fiat Punto 176, MK 1 - Years 1993-1999
Part: Control arm

To replace the steering rack boot, first remove the tie rod end. This is a very simple operation: unscrew the nut securing the ball joint of the tie rod end to the hub and pull it out from the hub (you may need to use a fork puller or tap it with a hammer without removing the nut); loosen the lock nut that secures the tie rod end and unscrew the tie rod end, counting the number of turns; then remove the securing clips of the boot and pull it off; if necessary, apply grease and insert the new boot, securing it with the appropriate clips; then screw the lock nut onto the tie rod and the tie rod end the same number of turns, and secure it at the hub side as well; at the end of the operation, it may be necessary to perform a wheel alignment to centre the steering wheel.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Steering Rack Repair Instructions
Steering Rack Repair Instructions
Fiat Punto (1993-1999 / 176, MK 1) It is common for wear in the sliding bush of the steering rack to create play, leading to noise, especially when driving on uneven surfaces. You can …
Replacement of Steering Rack Boot
Replacement of Steering Rack Boot
Fiat Punto (1993-1999 / 176, MK 1) If the boot covering the tie rod (or axial joint) of the steering rack fails, it is essential to replace it promptly to prevent dirt and especially w…
Replacing the CV Boot on the Gearbox Side
Replacing the CV Boot on the Gearbox Side
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) The "easy boot" system allows you to replace the CV boot without having to dismantle it. The boot is open along one side and wraps around the drivesh…

Other guides you may be interested in

How to Change the H7 Headlight Bulb on an Audi A3

When replacing the front headlight bulbs, choosing the right bulbs is certainly the first hurdle to overcome: halogen, blue white light, xenon, or LED. Once you have made your choice, installing the new bulb can be done without removing the headlight. Simply open the front bonnet, locate the protective cap of the bulb holder, and press on the corresponding latch to remove it. Then grasp the bulb's power connector and pull it out along with the bulb itself, disconnect the connector, fit the new bulb, and press it into its seat until it clicks into place.

Watch the video!


by ScegliAuto

More videos