Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulbs on the Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Headlight bulb

In this video, learn how to remove and replace the front headlamp bulbs on the Fiat Panda 169 by following these simple steps. First, open the bonnet and remove the plastic cover for the bulbs by pulling the two metal levers; then disconnect the electrical connector of the lamp and unclip the metal spring to remove it, as shown in the video. At this point, insert the new bulb, in this case, an LED type with H4 fitting; then insert it in the correct orientation and reassemble everything, following the video tutorial to the end!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Fiat Panda 169
Replacing Front Headlight Bulb on Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Today, you will learn how to remove and replace the front headlight bulb on a Fiat Panda 169, as well as on other FCA group car models. First, open t…
Removing the Front Headlamp and Bulb on the Fiat Panda 169
Removing the Front Headlamp and Bulb on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Discover how to remove the front headlamp and replace the bulb on the Fiat Panda 169, second series. First, remove the front wheel arch liner by unsc…
How to Change the Front Headlamp Bulb on Panda
How to Change the Front Headlamp Bulb on Panda
Fiat Panda (2003-2012 / 169, MK 2) Do you want to replace the bulbs inside the front headlamp of the Panda? Let's see how to disassemble all the pieces. Lift the bonnet and locate the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos