Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light Bulbs on Fiat Panda 2 (169)

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Tail light bulb

In this short video, you will learn how to remove the rear light and replace the bulbs on a Fiat Panda second series, specifically the 169. Start by opening the rear hatch of your car; then unscrew the fixing screws located on the sides using a 10 mm spanner. At this point, gently lever the sides to remove the light, disconnecting the electrical connector of the bulbs; now remove the fixing screws of the bulb holder to extract it along with the bulbs: rotate the bulbs to replace them with new ones, as shown in the video!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Brake Shoes on Fiat Panda 169
Replacing Rear Brake Shoes on Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video shows how to remove and replace the rear brake shoes on a Fiat Panda 169, second series. First, lift the vehicle and remove the rear wheel…
How to Replace Wiper Blades on a Fiat Panda 169
How to Replace Wiper Blades on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will replace the front and rear wiper blades on a second-generation Fiat Panda 169 in simple steps. First, start by removing an…
How to Remove the Rear Seats from the Fiat Panda 169
How to Remove the Rear Seats from the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, see how to remove the rear seats from the Fiat Panda 169, second series, in simple steps. First, open the rear doors and s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos