Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Gluing the Interior Rear View Mirror of a 1996 Fiat Punto 55

Model: Fiat Punto MK 1, 176 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999
Part: Rearview mirror

See other generations:
Video tutorial

The video shows how to carry out the gluing operation for the interior rear view mirror of a 1996 Fiat Punto 55. This operation can be done without resorting to authorised repairers, thus saving a lot of money. Obtain the appropriate glue from authorised retailers.

Apply a layer of glue to the metal plate of the mirror and stick the mesh onto it. Then attach the whole assembly to the glass and apply pressure in some way for at least a minute to ensure that the mesh adheres well to the glass. Finally, clip the mirror onto the metal plate.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Remove the Spoiler on a Fiat Grande Punto
How to Remove the Spoiler on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Let's see how to remove the rear spoiler on a Fiat Grande Punto. Remove the plastic trim with a screwdriver, unscrew the screws located inside (the s…
How to replace the timing belt on the Fiat Punto?
How to replace the timing belt on the Fiat Punto?
Fiat Punto (1993-1999 / MK 1, 176) To replace the timing belt on the Fiat Punto, lift the car with a jack or ramp so you can loosen the screws securing the front right wheel. At this p…
How to Replace the Auxiliary Belt on a Fiat Punto
How to Replace the Auxiliary Belt on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before starting, exit the cabin of your Fiat Punto and lift the front end using a ramp or jack. Begin by loosening the tensioner that holds the auxil…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos