Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clutch Cable of the Fiat 124 (1979)

Model: Fiat 124 MK 1 - Years 1966-1985

In this tutorial, you will learn how to remove and replace the clutch cable of the first series Fiat 124 from 1979. First, open the front door and start by disconnecting the cable from the clutch pedal; then open the bonnet to disconnect the wiring from the gearbox, as shown in the video. At this point, remove the entire cable along with the sheath, disconnecting it from the adjuster found under the vehicle; use a socket spanner for this. Finally, replace the clutch cable with the new one, applying the reverse procedure!

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radiator on the Fiat 124 Spider
How to Replace the Radiator on the Fiat 124 Spider
Fiat 124 (1966-1985 / MK 1) To replace the radiator on the Fiat 124 Spider, open the bonnet to access the components inside the engine bay: immediately behind the front grille, …
Guide to replacing the front headlight of the Fiat 124
Guide to replacing the front headlight of the Fiat 124
Fiat 124 (1966-1985 / MK 1) Today, we will discover the steps to remove and replace the front headlight of the Fiat 124 and 124 Spider. First, move to the front of the vehicle a…
Removing the Fuel Filter on a Fiat 124
Removing the Fuel Filter on a Fiat 124
Fiat 124 (1966-1985 / MK 1) Removing the fuel filter on a Fiat 124. Here’s how to do it from inside the engine bay. Open the bonnet and locate the fuel filter as shown in the vi…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos