Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Wheel on a Fiat 500

Model: Fiat 500 Epoca - Years 1957-1975
Part: Wheel

To change the wheel on a classic Fiat 500, go to the front of the car and open the bonnet. Take the tools from the designated toolkit, unscrew the wheel cover, and remove it. Use the L-shaped spanner to loosen the bolts. Position the jack perpendicular to the door shut line in the hole where the jack piece fits and lift the car. Once the wheel is off the ground, remove the previously loosened bolts and take off the wheel. Now, take the spare wheel, aligning the small pin with the small hole in the wheel, and hand-tighten the bolts without fully tightening them. Lower the car until the jack is no longer under load, then fully tighten the bolts with the L-shaped spanner. Finally, refit the wheel cover. Now that the wheel is changed, store the tools in their proper place.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel from a Fiat 500
How to Remove the Steering Wheel from a Fiat 500
Fiat 500 (2007-2021 / 312) Before starting, sit in the driver's seat of your Fiat 500. Begin by unscrewing and removing the screws that secure the airbag to the steering wheel,…
Removing the Steering Wheel from a Fiat 500
Removing the Steering Wheel from a Fiat 500
Fiat 500 (2007-2021 / 312) How to remove the steering wheel from a Fiat 500? Here’s how to detach the steering wheel and airbag. Insert a screwdriver into the slots at the back…
How to Change the Spare Wheel on a Fiat 500
How to Change the Spare Wheel on a Fiat 500
Fiat 500 (2007-2024 / 312) Let's see how to change the spare wheel on a Fiat 500. Open the boot and take the wheel removal kit, which includes: jack, jack handle, screwdriver, …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos