Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : Removal of the door panel of the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2021
Part: Door panel
Operation: Removal of the door panel of the Fiat 500

Let's see in this short and simple video how to remove the front door panel of the Fiat 500. First, we open the front door and remove the plastics that we find on the panel grip handle; we then use a ratchet wrench to unscrew the screws that we find below, as illustrated in the video. At this point we unscrew the screws that we find on the opening handle hole and lever on the sides to release it; we just have to unhook the opening handle cable, located on the back, to permanently remove the panel!


Posted on 6 December 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2023 - Why won't the trunk of the Fiat 500 open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos