Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to replace the resistance connector of the air conditioning of the Fiat Grande Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Air conditioning
Operation: How to replace the resistance connector of the air conditioning of the Fiat Grande Punto

In the following video we will see how to replace the resistance connector of the Grande Punto air conditioner. This connector is positioned under the dashboard, on the passenger side, inside a white body, as can be seen in the video. Therefore, the first thing to do is to remove the connector. To do this, simply remove the appropriate screw and then pull the levers down until the connector releases from its position. At this point we connect the cables of the new connector to those of the car and reposition it in its place under the dashboard.


Posted on 25 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - Why is the air conditioning of the Fiat Grande Punto not working anymore? Read Answer
    • Punto 2005-2018 - What problems with the climate control on the Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - How to solve the problem with the dual-zone climate control on the Fiat Grande Punto? Read Answer
    • Punto 1999-2011 - Where is the air conditioning resistor located on the Fiat Punto? Read Answer
    • Punto 2005-2018 - Why does the two-zone climate of the Fiat Grande Punto not work? Read Answer
    • Punto 2005-2018 - Why does the air conditioning not work in the Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - What causes the non-working air conditioning in the Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - Where is the air conditioning fan located in the Fiat Punto? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos