Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Fiat Panda?

Model: Fiat Panda - Years 2012-2021
Part: Diesel fuel filter

In this video, you will see how to replace the diesel filter on a Fiat Panda 1.3 Multijet, a very simple operation. First, ensure the battery is disconnected to work safely. Once done, disconnect the two upper pipes by unlocking the respective clips and also disconnect the central connector. At this point, using a 10 mm socket spanner, undo the two fixing bolts and remove the entire assembly, which you will open to replace the filter contained inside. Finally, reassemble everything by following the reverse procedure.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on a Fiat Panda 1.3 MultiJet
How to Replace the Diesel Filter on a Fiat Panda 1.3 MultiJet
Fiat Panda (2012-2026 / 319, MK 3) .. This short video tutorial shows how to replace the diesel filter on a Fiat Panda 1.3 MultiJet of the third generation, produced from.. …
How to Replace the Diesel Filter on a Fiat Panda
How to Replace the Diesel Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) The diesel filter on the Fiat Panda 1.3 MJT is the classic immersion cartridge filter; the filter housing, also known as the bowl, is located just be…
How to Replace the Diesel Filter on a Fiat Panda
How to Replace the Diesel Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to replace the diesel filter on your Panda without incurring labour costs? Here's how to do it yourself effectively. First, lift the bonnet and s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos