Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Diesel fuel filter

The diesel filter on the Fiat Panda 1.3 MJT is the classic immersion cartridge filter; the filter housing, also known as the bowl, is located just behind the engine coolant reservoir, practically just below the windscreen on the passenger side. Once you locate the filter housing, disconnect the connector and the fuel inlet and outlet lines to unscrew the cap and extract the cartridge. After removing the old filter, check if it is necessary to completely remove the bowl to clean it properly. Insert the new cartridge, replacing the supplied O-rings as well.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on a Fiat Panda
How to Replace the Diesel Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to replace the diesel filter on your Panda without incurring labour costs? Here's how to do it yourself effectively. First, lift the bonnet and s…
How to Replace the Diesel Filter on a Fiat Panda?
How to Replace the Diesel Filter on a Fiat Panda?
Fiat Panda (2012-2021 / ) .. In this video, you will see how to replace the diesel filter on a Fiat Panda 1.3 Multijet, a very simple operation. First, ensure.. …
How to Replace the Diesel Filter on a Fiat Panda
How to Replace the Diesel Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) .. In this video tutorial, you can see how to replace the diesel filter on a Fiat Panda 1.3 "MultiJet" 75 HP, following some essential steps:.. …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos