Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the Fiat 500 Abarth license plate bulb?

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2021
Part: License plate light
Operation: How to replace the Fiat 500 Abarth license plate bulb?

In order to replace the Fiat 500 license plate light bulb, it is necessary to use an object that acts as a lever, such as a slotted screwdriver, to remove the ceiling light located immediately above the license plate. Once this has been removed, it will be possible to remove the bulb that is inside its seat, inserted between the two terminals. Once the old bulb has been removed, you can insert the new one and snap it between the two poles. After insertion, it will be necessary to close the ceiling light and check that the plate is properly illuminated.


Posted on 2 September 2022 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • 500 2007-2023 - Why is the license plate light on the Fiat 500 not working? Read Answer
    • 500 2014-2022 - How to troubleshoot license plate lights in Fiat 500? Read Answer
    • 500 2007-2022 - Why do the license plate lights of the Fiat 500 no longer work? Read Answer
    • 500 2007-2023 - How to replace the license plate lights in the Fiat 500? Read Answer
    • 500 2007-2023 - How to replace the rear license plate light on a Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos