Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the rear light of the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Tail light
Operation: How to replace the rear light of the Fiat 500

If the rear light of your Fiat 500 is damaged and you want to replace it, just follow the instructions in the following mini guide dedicated to you. Before we begin, we remind you that it is important to completely turn off the car and park it on a level surface for safety reasons. Then go to the rear of the car, lift the hood and unscrew the two screws located on the side of the headlight. At this point, pull the latter towards you and disconnect the electrical pin. Finally, connect and mount the new headlight correctly. Re-tighten the two screws and you are done.


Posted on 11 September 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How to replace the brake light bulb on the Fiat 500l? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos