Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the cabin filter on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Cabin air filter

In this short video tutorial, see the procedure to follow to replace the cabin filter on a Fiat Grande Punto, produced from 2005 to 2018. To access the filter, first remove the glove compartment. To do this, remove the plastic panel on the central divider on the passenger side, then open the glove compartment and remove the plastic screw located at the bottom on the right, and then completely remove it. Now, remove the upholstery covering the filter by taking out the retaining clips. Finally, remove the plastic panel covering the filter to extract it and replace it. Now follow the operation in reverse to complete the job.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this brief and simple guide, you will see the steps to remove and replace the cabin air filter of the Fiat Grande Punto, as well as the Punto Evo.…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The cabin air filter has the function of preserving the health of the driver and occupants of the vehicle by allowing the air conditioning system to …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the air filter from a Grande Punto? Let’s see how to disassemble the pollen filter on a Fiat. Remove the cover located at the lower rig…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the cabin filter on the Fiat Grande Punto? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos