Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Dashboard Bulb of the Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Instrument panel light

See other generations:
This video is currently unavailable

In this video tutorial, you can see how to replace the bulbs of the old model Fiat Panda, following a few simple steps. First, take a screwdriver and unscrew the screws located on the left and right sides of the dashboard and underneath it, as shown in the video.

Disconnect the dashboard and unplug the electrical connectors. Now, unscrew the screws holding the speedometer and instrument cluster in place.

You can now remove the small bulbs and replace them with new ones of the same amperage (INCANDESCENT BULBS T5). Reassemble all parts in reverse order. Test the correct operation.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to replace the front headlight bulb of the Fiat Panda
How to replace the front headlight bulb of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Replacing the headlight bulb of the Fiat Panda is a simple and quick operation that can be done independently. To replace the bulb, we need to open t…
How to Remove the Glove Compartment from the Fiat Panda
How to Remove the Glove Compartment from the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In today's video tutorial, learn how to remove the glove compartment and install the bulb in the Fiat Panda by following the instructions below. Firs…
How to replace the dashboard indicator bulb on a Fiat Panda
How to replace the dashboard indicator bulb on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) If the light illuminating the controls of the air vents on the Fiat Panda dashboard stops working, you need to replace the bulb. Gather some plastic …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos