Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel of the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Door trim panel

To remove the door panel of the Fiat Panda, unscrew the fastening bolts located at the bottom of the panel. Then, use a tool to pry off the internal clips that hold the panel in place, disconnecting the internal connector of the window switch. Once the old panel is completely free, you can insert a new one: connect it to the connector and then fit it into its housing, securing it with the bolts.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the door of your Fiat Panda. Begin by unfastening and removing the covers near the internal door handle. Next, unscrew and remo…
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the door of your Fiat Panda. Begin by unclipping and removing the covers positioned near the internal handle. Next, unscre…
Fiat Panda (2003-2012 / 169, MK 2) Start by opening the door of your Fiat Panda. Next, unclip and remove the covers located near the internal door handle. Once done, unscrew and remove…

    Frequently Asked Questions

    • Panda 1980-2003 - How do you remove the internal door panel on the FIAT Panda 141? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos