Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Exhaust Manifold Gasket

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Engine

Before applying the new gasket, it is absolutely essential to thoroughly clean the gasket seating, both on the cylinder head side and the manifold side: remove any dirt and deposits that could compromise the adhesion and sealing of the gasket. Once cleaning is complete, insert the new gasket, made of two metal elements, aligning it with the dowel pins. Fit the exhaust manifold and tighten the securing nuts in a cross pattern using a torque wrench. There is no need to apply gasket sealant.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (1999-2011 / MK 2, 188) Before applying the new gasket to the intake manifold, thoroughly clean the gasket seating surfaces, both on the manifold side and the cylinder head …
Fiat Punto (1999-2011 / MK 2, 188) First, check, as shown in the images, that the surface of the cylinder head is even. Next, position the gasket first and then the intake manifold. At…
Fiat Punto (1999-2011 / MK 2, 188) In this guide, find the main instructions to remove and replace the exhaust manifolds on the Fiat Punto. First, open the bonnet of your car and begin…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos