Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the LPG Filters on a 2017 Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Checks and maintenance

In this video tutorial, you will see how to replace the LPG filters on a 2017 Fiat Panda by following some essential steps: Important: when replacing the LPG filters, start the engine first and once it switches to LPG mode, switch the selector back to petrol. An important recommendation, the arrow must always point upwards (direction of the GAS). The first thing you need to do is loosen the three screws slowly in an anti-clockwise direction, and you will see gas escaping (wait for all the gas to escape, and once it has finished, proceed to completely remove the three screws). Once the three screws are removed, take off the cover and you will see the filter with its gasket. Using a flathead screwdriver, try to pull the filter out of its seat, and clean the housing with a clean cloth (as shown in the video). Take the new filter with its gaskets and start by placing the first gasket at the bottom, then place the filter in position with the arrow pointing upwards, then position the second gasket; now you can place the cover and secure it with the three screws: (Tighten the screws by turning them half a turn at a time).

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Why does the engine light come on in a 1.2 Panda with LPG?
Why does the engine light come on in a 1.2 Panda with LPG?
Fiat Panda (2003-2012 / 169, MK 2) In this video we see the reason why the engine light comes on when switching from petrol to LPG on a Panda 1.2: in fact, when switching from petrol t…
How to Replace the LPG Filter on a Fiat Panda
How to Replace the LPG Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you start, open the bonnet of your Fiat Panda. Begin by unscrewing and removing the screw that secures the LPG filter to its mounting bracket,…
Replacement of the LPG filter of the Fiat Panda 169
Replacement of the LPG filter of the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Every thirty thousand kilometers it is recommended to change the LPG filter on a Fiat Panda with a Landi system in order to ensure a clean fuel flow.…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the outside temperature sensor on the Fiat Panda located? Read answer
    • Panda 2003-2012 - What causes the power steering problem on the Fiat Panda? Read answer
    • Panda 2003-2012 - How to adjust the headlights in the Fiat Panda? Read answer
    • Panda 2012-2021 - What is the tightening torque of the rear wheel hub nut of the Fiat Panda? Read answer
    • Panda 2012-2021 - How many liters of fuel does the Fiat Panda have in reserve? Read answer
    • Panda 2003-2012 - Where is the oil pressure sensor located in the Fiat Panda? Read answer
    • Panda 2012-2026 - How to fold back seats in the Fiat Panda? Read answer
    • Panda 2012-2026 - How many km can the Fiat Panda travel in reserve? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos