Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt of the Fiat Panda 1.2 LPG?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt of the Fiat Panda 1.2 LPG, lift the car using a ramp and remove the front right wheel along with the corresponding wheel arch. Once these parts are removed, disconnect the water pump and loosen the tensioner pulley.

Next, access the engine bay by removing the side cover of the engine block. This will allow you to also loosen the other pulleys and slide the belt out of its housing; it must be replaced with a new spare part, and all removed parts can be reinstalled.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Fiat Panda
How to Replace the Timing Belt on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Today, you will learn how to replace the timing belt on a Fiat Panda. First, open the front bonnet of the Panda and loosen the front wheel, then lift…
How to Replace the Timing Belt on a Fiat Panda?
How to Replace the Timing Belt on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Good morning, today's guide aims to replace the timing belt on your Fiat Panda. Start by opening the front bonnet. Next, remove all components relate…
How to Replace the Timing Belt on the Fiat Panda?
How to Replace the Timing Belt on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the timing belt on the Fiat Panda, open the bonnet to access the left side of the engine block: this can be removed to access the underlyi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos