Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Climate Control Switches

Model: Fiat 500 312 - Years 2007-2024
Part: Dashboard

If you need to remove the block containing the climate control switches (specifically, the one with four knobs to adjust temperature, fan speed, air recirculation, and airflow direction), you can follow the simple instructions in this tutorial.

In fact, it only takes about two minutes; just know where to position your fingers to extract the control block itself. If you can't manage with your fingers, you can use a flat-head screwdriver as a last resort.

Repositioning everything back in place is equally simple.

Updated on 1 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Climate Control Bulbs on a Fiat 500
Replacing the Climate Control Bulbs on a Fiat 500
Fiat 500 (2007-2021 / ) This brief and simple guide outlines the steps to remove and replace the climate control bulbs on a Fiat 500. First, get inside the vehicle and start…
How to Replace the Climate Control Bulbs on the Fiat 500
How to Replace the Climate Control Bulbs on the Fiat 500
Fiat 500 (2007-2024 / 312) Through these simple instructions, you will see how to remove and replace the bulbs of the climate control switches on the Fiat 500. First, get in th…
How to Replace the Knob Bulbs on a Fiat 500
How to Replace the Knob Bulbs on a Fiat 500
Fiat 500 (2007-2024 / 312) How do we change the bulbs for the manual air conditioning knobs on a Fiat 500? Let's see how to proceed. Remove the ventilation knob panel using a p…

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos