Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Double DIN Sat Nav in a Fiat 500

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

In this video tutorial, you can see how to install a 2 DIN car radio by following a few simple steps that will guide you to a correct installation independently. First, take the keys provided to remove the car radio; get inside your car, remove the buttons from the radio to insert the keys (see illustrative video).

Now pull the radio towards you and remove it from its housing, then disconnect the electrical cables. Next, take the new radio and insert it into the designated slot and connect the electrical cables first.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

Remove Radio from Fiat 500
Remove Radio from Fiat 500
Fiat 500 (2007-2021 / 312) Let's see how to remove the car radio from a Fiat 500. Use the original or aftermarket metal keys to remove the radio from the 500. Insert the keys i…
How to Replace the Standard Radio with a 2 Din in the Fiat 500
How to Replace the Standard Radio with a 2 Din in the Fiat 500
Fiat 500 (2007-2022 / 312) Discover in this guide how to replace the standard radio in the Fiat 500 by following the instructions below. First, get inside the vehicle and start…
How to Remove the Radio from a Fiat 500
How to Remove the Radio from a Fiat 500
Fiat 500 (2007-2024 / 312) Is the radio in your Fiat 500 damaged? Here’s how to remove it. Remove the radio buttons (2 on the right and 2 on the left), using the original or af…

    Frequently Asked Questions

    • 500 2007-2021 - How to activate the aux cable in a Fiat 500? Read answer
    • 500 2007-2022 - What to do if the radio of the Fiat 500 does not work? Read answer
    • 500 2014-2022 - What to do if the USB port of the Fiat 500X does not work? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos