Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : How to replace the low beam bulbs in the Fiat Ducato van?

Fiat Ducato - Video tutorial

Model: Fiat Ducato X250 - Years 2006-2014
Part: Headlight bulb
Operation: How to replace the low beam bulbs in the Fiat Ducato van?

In this tutorial we can see how to disassemble the headlights in the Fiat Ducato van and replace the bulbs. Before proceeding, make sure that the key is not inserted in order to operate in complete safety. We start by opening the bonnet, then unscrew the two fixing screws of the top cover with a Phillips-head screwdriver. We then also remove the bottom cover with a Torx T40 screwdriver and unscrew all the headlight bolts with a 10mm socket wrench. At this point we can separate the headlight from the bodywork, disconnect the power connector, open the large cap on the back and proceed with the replacement of the faulty bulb.


Posted on 20 October 2022 by ScegliAuto



How do you replace the low beam bulbs on the Fiat Ducato?
Fiat Ducato (2014-2023 / X290) The authors of the video show us the longest procedure for replacing the low beam lights of the Fiat Ducato. It requires completely removing the head
How to change the low beam light bulb on the Fiat Ducato - Peugeot Boxer
Fiat Ducato (2006-2014 / X250) Today we will see how to remove and replace the dipped beam headlight bulb of the Fiat Ducato, but also of the Peugeot Boxer. First of all, we open t
How to replace the front headlight bulbs in the Fiat Ducato van?
Fiat Ducato (2006-2014 / X250) In this tutorial, we can see how to replace the front headlight bulbs in the Fiat Ducato van, a very simple and quick operation. First of all, make s

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos