Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
169, MK 2
- Years 2003-2012 In this video tutorial you can see how you can reset the Fiat Panda maintenance warning light, following simple steps: first you need to perform maintenance on your vehicle such as changing the engine oil and filters. Then enter the vehicle, insert the key and turn on the instrument panel only, press the button at the bottom right next to the speedometer and you will see the message 10 on the display; now hold the button until the countdown ends. Now remove the key and then put it back to start the engine, you should now see the maintenance kilometers reset.
Posted on 22 October 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.073
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |