Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How can I reset the service light on my Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Service warning light

To reset the maintenance service indicator on your Fiat Panda, first enter the vehicle. Then, turn on the instrument panel (you will see the maintenance light illuminated). Press and hold the accelerator pedal. While keeping the accelerator pedal pressed, press the brake pedal seven times. Switch off the instrument panel. Turn it back on and verify the reset has been successful. Always remember to perform modifications to the onboard computer with the vehicle stationary and switched off. Review the maintenance steps if you were unsuccessful.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Fiat Panda
Resetting the Service Light on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Today, we will discover the steps that will show you how to reset the service light for the regular maintenance oil change on the Fiat Panda. First, …
How to Reset the Service Light on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This video shows how to reset the service light on your Fiat Panda using a diagnostic scanner programme called X431 Pro3. First, launch the X431 Pro3…
How to reset the oil service light in a Fiat Panda?
How to reset the oil service light in a Fiat Panda?
Fiat Panda (2012-2021 / ) In this video, you can see how to reset the service light in the Fiat Panda, a very simple operation to follow only after performing the required mai…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - What to do when the service warning light comes on on the Fiat Panda 169? Read answer
    • Panda 2012-2026 - How do you reset the Fiat Panda Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos