Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

Today, learn how to reset the service light related to the service interval on the Fiat Panda. The service light and oil light illuminate on the vehicle when it's time to change the engine oil or perform a service.

To reset the service light, turn on the vehicle's ignition and press the accelerator pedal for 60 seconds. While keeping the accelerator pedal pressed, press the brake pedal 7 times, then turn off the ignition to complete the service light reset.

Wait 20 seconds before turning the ignition back on.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Fiat Panda
How to Reset the Service Light on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Resetting the service light on a Fiat Panda model 3 is very simple and can be done independently. Follow these steps: First, turn on the vehicle's in…
How to Reset the Service Light on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This video shows how to reset the service light on your Fiat Panda using a diagnostic scanner programme called X431 Pro3. First, launch the X431 Pro3…
How to Reset the Service Light on the Fiat Panda
How to Reset the Service Light on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) On a Fiat Panda, resetting the service light related to the service interval is a very simple operation that will take only a few minutes. To reset t…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - How do you reset the Fiat Panda Service warning light? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos