Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

On a Fiat Panda, resetting the service light related to the service interval is a very simple operation that will take only a few minutes. To reset the service light, turn on the ignition and then start the engine.

Press the accelerator pedal and keep it pressed while pressing the brake pedal ten times. Release both pedals and proceed to restart the vehicle.

Then turn off both the engine and the ignition before restarting the instrument cluster. If the light remains on, you will need to visit a garage to determine the cause of the problem.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on Fiat Panda 1.3 MultiJet
How to Reset the Service Light on Fiat Panda 1.3 MultiJet
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will reset the service light for the regular oil change maintenance on a Fiat Panda 1.3 MultiJet second series, but this also a…
How to Reset the Service Light on a Fiat Panda
How to Reset the Service Light on a Fiat Panda
Fiat Panda (2012-2021 / ) To reset the service light on the Fiat Panda, first follow our instructions. Get into the car and turn the key to position one to power on the vehicl…
How to Reset the Service Light on a Fiat Panda
How to Reset the Service Light on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Today, learn how to reset the service light related to the service interval on the Fiat Panda. The service light and oil light illuminate on the vehi…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - How do you reset the Fiat Panda Service warning light? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos