|
Do it yourself
| |||
| ||||
Replacing the Timing Belt on the Fiat Punto 1.2 8v
Model: Fiat Punto
MK 3, Punto EVO, 199, Grandepunto
- Years 2005-2018
To replace the timing belt, proceed as follows: lift the car and remove the lower covers, loosen the tensioner for the auxiliary belt and remove it. Unscrew the bolts securing the lower pulley and take it off. Then, remove the timing belt protection cover. Lower the car to remove the engine mount from above the engine bay. Next, remove the rear timing belt cover and mark the relative position between the teeth of the upper and lower pulleys and the engine itself with a marker. Loosen the nut on the tensioner and remove the pulley. Proceed to remove the water pump and, if necessary, replace it. Take the new belt and position it. Refit the tensioner pulley and tighten it to apply tension to the belt. After that, reassemble all components in reverse order.
Updated on 22 June 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
The instructions in this guide will show us the main steps useful for disassembling and replacing the timing belt of the Fiat Punto 1.4. First, we op…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
In this video, you will see the steps to change the timing belt on a Fiat Grande Punto or Punto Evo with a 1.2 petrol engine. First, lift the vehicle…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
The main instructions provided in this guide will show us how to disassemble and replace the timing belt of the Fiat Grande Punto 1.4. First, let's o…
Other guides you may be interested in
|
How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI
Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.508
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
