Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Service warning light

To reset the service light, follow these steps: turn on the ignition (do not start the engine), press and hold the accelerator pedal and simultaneously press the brake pedal at least five times, then wait at least 30 seconds before releasing the accelerator pedal. At this point, release both pedals and turn off the ignition by turning the key. Wait at least 30 seconds before turning the ignition key again and turning on the ignition. If the procedure has been carried out correctly, the service light will have been cleared.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Fiat 500X?
How do you reset the Service light on the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) To reset the Service light of the Fiat 500X, you need to insert the ignition key into the ignition switch, so that you can turn it to turn on the ins…
Resetting Service Light on Fiat 500X
Resetting Service Light on Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this video tutorial, learn how to reset the service light for routine maintenance on a Fiat 500X. First, get inside the vehicle and turn on the ig…
The service warning light on the Fiat 500x, how is it reset?
The service warning light on the Fiat 500x, how is it reset?
Fiat 500 (2014-2022 / 500 X) Let's talk about the Fiat 500X and how to reset its Service light, which indicates when the scheduled maintenance is due. It goes without saying that…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos