Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the injectors of the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Injectors
Operation: How to replace the injectors of the Fiat 500

In today's video we see how to replace the injectors in the Fiat 500 LPG. Specifically, this operation is necessary when your car has an irregular idle or in general jerks in gear. We recommend carrying out this work only and exclusively with a cold engine. As a rule, it is good to act with the replacement of all four units. We then proceed by opening the engine hood. We remove the plastic cover that we are in front of us and access the injectors. Let's extract them and replace them with new units. We can reassemble and test the car.


Posted on 31 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos