Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to change the injectors of the Fiat 500 1.3 Multijet

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Injectors
Operation: How to change the injectors of the Fiat 500 1.3 Multijet

Today we will see, in this video tutorial, how to disassemble and replace the diesel injectors of the Fiat 500 1.3 Multijet. First we open the bonnet and remove the engine protection; then we go to disconnect the electrical connector of the coil, unscrewing it to remove it from the injector, as illustrated in the video. At this point we use a hex key to remove the small top cap, using a socket wrench to unscrew and then remove the injector; replace it with the new one and reassemble everything, applying the reverse procedure!


Posted on 12 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos