Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset TPMS Tyre Pressure on the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Tire pressure warning light

Before resetting the low tyre pressure warning signal, check and restore the optimal inflation pressures. Then, access the driver's seat and turn the ignition key to switch on the dashboard. Locate the "set" button on the left side of the steering wheel controls and scroll through the menu using the "up arrow" and "down arrow" buttons until you reach the option: "reset tyre pressure". Using the set button, select the option to turn off the tyre pressure warning light. At this point, exit the onboard computer menu, and the warning will be reset.

Updated on 24 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the "TPMS" Light on a Fiat Tipo
How to Reset the "TPMS" Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, check and, if necessary, adjust the pressure in the tyres, then sit in the driver's seat of your Fiat Tipo. Start the engine. Next,…
How to Reset the Tyre Pressure Warning Light on the Fiat Tipo
How to Reset the Tyre Pressure Warning Light on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In a few simple steps, learn how to reset the tyre pressure monitoring system (TPMS) warning light on the Fiat Tipo; before performing the reset, ens…
How to Reset the TPMS Light in a Fiat Tipo
How to Reset the TPMS Light in a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) To reset the TPMS light in a Fiat Tipo II, insert the key without starting the engine and check that the tyre pressures are correct. Locate the butto…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos