Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Differential Oil on the Fiat Toro?

Model: Fiat Toro MK 1 - Years 2016-2024
Part: Differential

To change the differential oil on the vehicle, follow these steps: Lift the car on a lift. Place a container under the differential to catch the used oil and use a suitable wrench to remove the drain plug. Wait a few minutes for all the used oil to drain out, then screw the drain plug back in. Identify the type of oil suitable for your vehicle (refer to the owner's manual). Locate the fill plug on the right side of the differential and unscrew it, using a flexible hose to add the new oil. Finally, screw the fill plug back in.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Engine Oil and Oil Filter on the Fiat Toro
Fiat Toro (2016-2024 / MK 1) Today, let's go through the procedure to perform the routine maintenance service by replacing the engine oil and oil filter on the Fiat Toro. First, …
How to Reset the Oil Service Light in the Fiat Toro?
How to Reset the Oil Service Light in the Fiat Toro?
Fiat Toro (2016-2024 / MK 1) In this tutorial, you will see how to reset the engine oil service light in the Fiat Toro, a very simple and quick operation. Before proceeding, make…
How to Reset the Oil Service Light on a Fiat Toro?
How to Reset the Oil Service Light on a Fiat Toro?
Fiat Toro (2016-2024 / MK 1) In this tutorial, you will see how to reset the oil service light on a Fiat Toro. Before performing this simple and quick operation, ensure you have …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos