Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blade on a Fiat Panda (169, mk 2)

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Windshield wipers

In this tutorial, see how to replace the wiper blade on a Fiat Panda (169, mk 2) by following these simple steps. The Fiat Panda uses a rear wiper blade that is 13 inches long (you can find either just the blade or the complete assembly with the arm at a parts dealer). To perform this job, you only need a 10 mm spanner. Attach the arm to the blade as shown in the video; the next step is to remove the old arm and then fit the new one. To do this, remove the cover located at the bottom of the arm; then, using the 10 mm spanner, unscrew the nut. Once the nut is removed, apply slight pressure to the arm to take it off. Now fit the new arm by reversing the steps.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Wiper Blades on a Fiat Panda
Replacing Wiper Blades on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This useful video tutorial explains, simply and quickly, the entire procedure necessary to replace the wiper blades on your Fiat Panda, model 169 pro…
How to Replace the Wiper Blades on the Fiat Panda?
How to Replace the Wiper Blades on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the wiper blades on the Fiat Panda, press the hook that secures the blade to its arm and remove the blade itself. To fit the new blade, si…
How to Replace the Wiper Blades on a Fiat Panda?
How to Replace the Wiper Blades on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Replacing the wiper blades on a Fiat Panda is a very simple and quick task. First, switch off the vehicle and position the wipers in the rest positio…

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the Fiat Panda wiper fluid reservoir located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos