Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Fiat Scudo?

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Starter motor

See other generations:
Video tutorial

To replace the starter motor on a Fiat Scudo, first disconnect the vehicle's battery: it is located under the protective panel beneath the front passenger footwell. Once the battery is disconnected, open the bonnet and unscrew the screws securing the air filter box, completely removing it from its housing.

After the box is removed, you can locate the starter motor underneath: disconnect the power cables and unscrew the fixing bolts, removing the old starter motor and replacing it with a new one.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Fiat Scudo
How to Remove the Door Panel of a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Before you begin, open the door of your Fiat Scudo. Start by unfastening and removing the inserts and covers of the door panel using a flathead screw…
How to Reset the Oil Warning Light on a Fiat Scudo
Fiat Scudo (1996-2007 / MK 1) The service light that illuminates on the instrument cluster of your Fiat Scudo Mk1 is fortunately just a reminder to perform a service on the vehicl…
Removing the Window Regulator Motor from a Fiat Scudo Door
Removing the Window Regulator Motor from a Fiat Scudo Door
Fiat Scudo (2007-2016 / MK 2) Is the window regulator not working on your Fiat Scudo? Remove the door panel to access the window regulator. Disconnect the battery terminals for sa…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos