Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

A Genius Space-Saving Bike Rack for Fiat Qubo

Model: Fiat Qubo MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Body

Video tutorial

Here is a genius bike rack made from a common load trolley, to which extensions of about 60 cm have been added to accommodate the entire frame of the bicycle, along with a support for the rear wheel and one for the front fork. It leaves much of the vehicle's load space free and allows for two rear seats, enabling the transport of passengers as well.

It is attached via a metal clip to the structure where the rear seat, currently removed, is fixed. On the other side, it rests on a small wheel - that of the trolley - which levels the structure on the right side.

It is held in place by Velcro and can be removed easily, like a tray. The structure can also be used to secure the bicycle to the wall in the garage while waiting for the next outing.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

Removing Seats from a Fiat Qubo
Removing Seats from a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) In this short guide video, you will learn how to remove the rear seats from a Fiat Qubo; primarily, we will cover the essential steps. First, open th…
Reset Tyre Light on the Fiat Qubo
Reset Tyre Light on the Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) How do you reset the light on the Fiat Qubo? Turn on the ignition and reset the light. Inflate the tyres before performing the reset. Enter the cabin…
How to Replace the Window Switch Panel on a Fiat Qubo
How to Replace the Window Switch Panel on a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) Below, you will find the instructions that will allow you to remove and replace the window switch panel on a Fiat Qubo in simple and quick steps. Fir…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos