Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats in the Fiat Punto EVO?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Seat

As seen in this tutorial, removing the rear seats in the Fiat Punto EVO is an extremely simple and quick operation. First, open both rear doors, then locate the two bolts at the ends of the seat, undo them, and separate the seat from the base by pulling it towards you. Next, undo the additional indicated bolts, including those accessible by folding down the backrest, unlock the two side pins using a flat-head screwdriver, and remove the entire assembly. To install any replacements, simply follow the reverse procedure.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seat Backs from a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, lower the two rear seat backs of your Fiat Punto. Begin by removing the carpet in the boot. Next, remove the lower bench of the rea…
How to fold down the rear seats on a Fiat Punto
How to fold down the rear seats on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To fold the rear seats of the Fiat Punto, you can follow these general steps. Open the trunk: this will give you access to the levers or buttons that…
Removing the Rear Seats from Your Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Are you planning to remove the rear seats from your Fiat Grande Punto? This video explains how to do it. After removing the rear seat base, use a soc…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos