Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Suspension on the Fiat 500L

Model: Fiat 500 500 L - Years 2012-2023
Part: Suspension system

In this brief guide, find step-by-step instructions on how to remove and replace the front suspension on the Fiat 500L. First, lift the vehicle and start by removing the front wheel; then remove the plastic cover located under the wipers and undo the suspension nut found at the top, as shown in the video. At this point, disconnect the suspension from the bottom by undoing all the pins and bolts; then install the new front suspension, following the video tutorial until the end for reassembly!

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Roof Bars on a Fiat 500L
How to Install Roof Bars on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Start by assembling the roof bars, adjusting them to the correct measurements for the roof of your Fiat 500L. Next, open the doors of your car and po…
Replacing the Glow Plugs on a Fiat 500L 1.3 Multijet
Replacing the Glow Plugs on a Fiat 500L 1.3 Multijet
Fiat 500 (2012-2023 / 500 L) In this brief guide, find the instructions to remove and replace the glow plugs on the Fiat 500L with a 1.3 Multijet engine. First, open the bonnet o…
Replacing the Rocker Cover Gasket on the Fiat 500L 1.4 T-Jet
Replacing the Rocker Cover Gasket on the Fiat 500L 1.4 T-Jet
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you will see the main instructions for removing and replacing the rocker cover gasket on the Fiat 500L 1.4 T-Jet. First, open…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos