Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Air Vents of the Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air vents

See other generations:
Video tutorial

Follow this guide for step-by-step instructions to remove and replace the air vents of the Fiat Bravo. First, get inside the vehicle and start by removing the side air vents from the dashboard; use a thin plastic lever to assist with the removal, as shown in the video.

Now, remove the central air vents in the same way; then install the new air diffusers, ensuring they fit perfectly in place, applying the reverse procedure for reassembly!


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to remove the centre dashboard panel on a Fiat Bravo?
How to remove the centre dashboard panel on a Fiat Bravo?
Fiat Bravo (1995-2002 / Bravo 1) To remove the centre dashboard panel on a Fiat Bravo, loosen the fastening screws located at the corners of the dashboard. Once these screws are loos…
How to Replace the Air Filter on the Fiat Bravo
How to Replace the Air Filter on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Unlike many other car models on the market, the air filter on the Fiat Bravo is not located in the engine bay but underneath the vehicle. Therefore, …
Replacing the Cabin Air Filter on the Fiat Bravo
Replacing the Cabin Air Filter on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this brief and simple guide, learn how to replace the cabin air filter on the Fiat Bravo by following the instructions below. First, get inside th…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos