Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Centre Console/Tunnel of the Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Center console tunnel

In this guide, you will find step-by-step instructions for dismantling the centre console or tunnel of the Fiat 500. First, get inside the vehicle and start by removing the plastic covers found inside the centre tunnel; then unscrew the fastening screws located underneath, as shown in the video. At this point, unscrew the fastening screws found on the sides using a Torx screwdriver, removing the side plastics; finally, completely detach the centre tunnel from the dashboard, applying the reverse procedure for reassembly!

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Centre Console from a Fiat 500
How to Remove the Centre Console from a Fiat 500
Fiat 500 (2007-2022 / 312) To remove the centre console from a Fiat 500, leverage the lower part of the cover that wraps its entire length to release the internal fastening cli…
How to remove the centre console from a Fiat 500?
How to remove the centre console from a Fiat 500?
Fiat 500 (2007-2022 / ) To remove the centre console from a Fiat 500, loosen the screws securing the corresponding plastic cover: these screws are located on the inner side …
Replacing the Gear Gaiter on Fiat 500
Replacing the Gear Gaiter on Fiat 500
Fiat 500 (2007-2021 / 312) Removing the gaiter from the Fiat 500? Remove the knob to change the damaged gaiter. Use a screwdriver to remove the plastic cover on the knob, then …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos