Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Indicator on a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Headlight bulb

This brief video guide shows the steps necessary to replace the indicator bulb on a second-generation Fiat Tipo, produced from 2016 to 2023. First, open the bonnet of the vehicle. Next, remove the front cover of the engine compartment by detaching the five clips that hold it in place, as shown in the video. Once done, remove the old bulb by turning it approximately a quarter turn anti-clockwise and extracting it along with the bulb holder. Then, replace the bulb in the holder and reassemble everything by following the reverse procedure.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Indicator Bulb in the Front Headlamp of a Fiat Tipo
Replacing the Indicator Bulb in the Front Headlamp of a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) This guide provides instructions on how to remove and replace the indicator bulb in the front headlamp of a Fiat Tipo. First, open the bonnet of the …
How to Replace the Indicator Bulbs on a Fiat Tipo
How to Replace the Indicator Bulbs on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the side indicator bulbs on a Fiat Tipo with LED ones, start with a plastic tool (a card will also work as shown in the video) to gently l…
How to Change the Time on a Fiat Tipo
How to Change the Time on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) This short video tutorial shows how to change the time on the onboard computer of a Fiat Tipo produced since 2016. First, turn on the vehicle's instr…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos