Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the Fiat 500 ceiling and passenger compartment lights

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Interior lights ceiling light bulb
Operation: How to remove the Fiat 500 ceiling and passenger compartment lights

In this short and simple guide we will see the steps that will allow us to remove and replace the light bulb in the passenger compartment of the Fiat 500. First of all, we get into the car and start levering on the side of the light to release and remove it ; we disconnect the electrical connector of the bulb, as shown in the video. At this point, remove and possibly replace the small bulb bulb, also replacing the entire ceiling light if necessary; we just have to reassemble everything, applying the reverse procedure of disassembly!


Posted on 22 April 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2021 - How to replace the light bulbs in the Fiat 500? Read Answer
    • 500 2007-2023 - Why doesn't the interior light of the Fiat 500 come on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos