Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Interior Light Bulbs

Model: Fiat 500 312 - Years 2007-2024
Part: Light bulb

Carefully disengage the interior light and disconnect the power connector.
Using a flat screwdriver, lever to open the lamp holder compartment, you will find the bulb; carefully remove it from the holder, following the instructions in the video, remove the protective glass and proceed to insert the "500" LED kit for your car, if necessary, as shown in the video, slightly modify the metal contact parts.
Now proceed to reposition the protective glass and reconnect the power connectors before refitting the interior light in the car.

In the video, the operation is performed on a Fiat 500.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Interior Light on a Fiat 500
Replacing the Interior Light on a Fiat 500
Fiat 500 (2007-2024 / 312) Remove the interior light if damaged or if you need to replace the bulbs. Use a screwdriver to lever between the interior light and the roof trim pan…
How to Replace the Ceiling Light Bulbs on a Fiat 500
How to Replace the Ceiling Light Bulbs on a Fiat 500
Fiat 500 (2007-2024 / 312) In this video, learn how to replace the ceiling light bulbs on a Fiat 500. Use a screwdriver to pry between the ceiling light and the headlining (wit…
How to disassemble the lights of the Fiat 500 X ceiling light
How to disassemble the lights of the Fiat 500 X ceiling light
Fiat 500 (2014-2022 / 500 X) Replacing the ceiling light bulb of the Fiat 500 X is a simple and quick operation that can be done independently thanks to our short video tutorial …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos