Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel of the Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Door trim panel

To remove the door panel of the Fiat 500, first detach the chrome cover located at the end of the internal handle and also remove the cover of the window switch panel. This will allow you to unscrew all the screws underneath, along with those located at the bottom of the panel. At this point, lift the panel upwards and then disengage the internal retaining clips, so that the piece can be completely removed after disconnecting the connector. You can then position the new piece by connecting and securing it properly.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (1957-1975 / Epoca) Begin by removing the left door panel on the Fiat 500 (old model): use a screwdriver to unscrew the securing screws located in the handle, remove the…
Fiat 500 (2007-2022 / ) To remove the door panel of the Fiat 500, detach the chrome trim at the base of the internal handle using a thin object. Once this is removed, you ca…
Fiat 500 (2007-2021 / ) To remove the door panel of the Fiat 500, use a lever tool to detach the cover near the window switch and the chrome trim around the internal handle.…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos