Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cylinder Head Gasket Replacement

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Engine

Before applying the new cylinder head gasket, it is absolutely essential to check the flatness of the surfaces, both on the head side and the cylinder block side: use a straight edge and a feeler gauge to ensure there are no deformations; then, re-tap the threaded holes using a tap of the appropriate diameter and pitch, taking care not to let any debris fall into the cylinders; apply the new cylinder head gasket, position the head itself, and use a new set of bolts for fastening, applying copper grease to the bottom of the thread and just below the head; tighten the bolts in a cross pattern using both a torque wrench and a standard wrench.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cylinder Head Cover Gasket on Fiat Punto
Replacing the Cylinder Head Cover Gasket on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video, you will see how to remove and replace the cylinder head cover gasket on a second series Fiat Punto. First, lift the engine bonnet and…
Guide to Replacing the Head Gasket on the Fiat Punto
Guide to Replacing the Head Gasket on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This guide will provide the instructions to remove the engine head and replace the gasket on the Fiat Punto. First, drain the engine oil into a conta…
Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Fiat Punto (1999-2011 / MK 2, 188) Before applying the new gasket to the intake manifold, thoroughly clean the gasket seating surfaces, both on the manifold side and the cylinder head …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos