Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on the Fiat 500

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tire pressure warning light

See other generations:
Video tutorial

The Fiat 500 is equipped with a tyre inflation monitoring system that alerts you when the pressure drops below the set values. If you need to adjust these values, for example when fully loaded, after adjusting the pressure according to the table provided by the manufacturer, you must reset the monitoring system.

To do this, sit in the driver's seat and start the car, then using the "Menu" button on the right side of the instrument panel, select "Menu" on the central display and use the "+" button to navigate to "Reset Tyres". Confirm with "Menu" and select and confirm "Yes".


Updated on 15 July 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Light on a Fiat 500
Resetting the Tyre Pressure Light on a Fiat 500
Fiat 500 (2007-2024 / 312) In this brief and simple video tutorial, you will learn how to reset the tyre pressure warning light on a Fiat 500. First, get into your vehicle and …
Resetting the Tyre Pressure Warning Light on a Fiat 500
Resetting the Tyre Pressure Warning Light on a Fiat 500
Fiat 500 (2007-2021 / 312) In this tutorial, you will see how to reset the tyre pressure warning light on a Fiat 500. First, get inside the vehicle and turn on the ignition. Th…
Resetting Tyre Pressure Light on a Fiat 500
Resetting Tyre Pressure Light on a Fiat 500
Fiat 500 (2007-2024 / 312) This tutorial explains how to reset the tyre pressure warning light on a Fiat 500. To reset this light, there are no special procedures to follow as …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos