Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Radiator on a Fiat Sedici?

Model: Fiat Sedici MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Heater core

Video tutorial

To replace the heating radiator on a Fiat Sedici, you must completely dismantle the dashboard: start by opening the glove compartment and removing it entirely by disengaging the pins inside. Then, proceed to loosen the screws that secure the centre panel, which contains the radio and climate control buttons; next, you will need to remove the steering wheel airbag from its housing to unscrew the nut that secures the steering wheel's central shaft and the plastic covers of the steering column.

By removing the entire dashboard, you will gain access to the heating radiator, which must be removed by unscrewing the securing screws and disconnecting the pipes and connectors.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

Fuse Box Diagram for Fiat Sedici
Fuse Box Diagram for Fiat Sedici
Fiat Sedici (2005-2014 / MK 1) The vehicle is equipped with two fuse boxes and relays; one is located in the cabin on the left side of the dashboard near the driver's door and is p…
Where are the fuses for the wing mirrors on the Fiat Sedici?
Where are the fuses for the wing mirrors on the Fiat Sedici?
Fiat Sedici (2005-2014 / MK 1) The Fiat Sedici does not have a dedicated fuse solely for the adjustment motors of the external wing mirrors. These motors, along with other componen…
Where to Find the Fuse Box in a Fiat Sedici
Where to Find the Fuse Box in a Fiat Sedici
Fiat Sedici (2005-2014 / MK 1) If you want to find the fuse box in your Fiat Sedici quickly, read this guide carefully and follow the steps. First, park the car on a flat surface, …

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos