Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and clean the MAP sensor in a Fiat Qubo.

Model: Fiat Qubo MK 1 - Years 2008-2019
Part: Engine

In this video tutorial we can see how it is possible to disassemble and clean the MAP sensor in a Fiat Qubo, when this is faulty and causes problems for the vehicle, therefore the yellow engine failure light will come on. Symptoms you may experience: excessive fuel consumption, lack of power and failed emissions tests. To remove the MAP sensor we have to lift the bonnet and secure it with a special rod; disassemble the air filter, then remove the clamp and unclip the pipe then remove the filter. Now that we've removed the air filter, we need to remove the sensor connector; then with a 20 torx and jack wrench, unscrew the sensor. Once the sensor has been removed, proceed to clean it and reassemble all the parts by proceeding backwards.

Posted on 27 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter in Fiat Qubo?
Fiat Qubo (2008-2019 / MK 1) Replacing the cabin filter in the Fiat Qubo is a very simple operation, let's see how to proceed in this tutorial. Let's start by locating and unscre…
How to replace the cabin air filter of the Fiat Qubo.
How to replace the cabin air filter of the Fiat Qubo.
Fiat Qubo (2008-2019 / MK 1) In the following guide, you will find a description of the procedure to independently replace the cabin air filter of your Fiat Qubo. First, purchase…
How to Remove the Air Control Knobs on Fiat Qubo
How to Remove the Air Control Knobs on Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) How to remove the air conditioning control knobs and replace the LEDs/bulbs on a Fiat Qubo? Follow these steps: Unscrew the air vents located above t…

Other guides you may be interested in

How to Change the Cabin Filter on a Fiat Punto Evo

How to change the air conditioning pollen filter on a Fiat Punto Evo? Remove the plastic cover of the centre tunnel (right side of the tunnel), then remove the plastic cover from the filter cap (located inside the centre tunnel), and extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the housing: refit the filter cap and secure the container (close the glove compartment located in the centre tunnel). Check the correct installation of the previously fitted parts.

Watch the video!


by ScegliAuto

More videos