Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Boot Courtesy Light

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Light bulb

Open the boot and look to the right; near the rear speaker, you will find the courtesy light. Carefully unclip it from its housing, taking care not to tug on the power cables, perhaps using a flathead screwdriver for assistance.
Now it’s up to you to decide whether to disconnect the connector or continue working inside the boot with the lamp holder connected.

Now open the lamp holder; it is clipped in and modular as shown in the video, and remove the old bulb.
Once the bulb is replaced, carefully close the lamp holder and clip it back into place in the boot.

As you can see, it is a very simple operation to carry out on a Fiat Punto.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the trunk of the Fiat Grande Punto.
How to open the trunk of the Fiat Grande Punto.
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) Opening the trunk of the Fiat Grande Punto from the outside is a simple and quick operation that can be done independently. To perform this action, w…
Replacement of the fuse for the interior lights of the Fiat Punto.
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) If the interior lights of the Fiat Punto stop working all together, it may be due to a fuse that has burned out due to overvoltage. To replace it, we…
How to open the locked trunk of a Fiat Grande Punto
How to open the locked trunk of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Punto EVO, Grandepunto ) In this video, we can see how it is possible to open the trunk - which has remained locked - of a Fiat Grande Punto. Of course, we have to enter from…

How to Replace Windshield Wiper Blades on BMW 5 Series E90

Keeping your windshield wiper blades efficient is essential for safe driving in both rain and for proper cleaning when activating the washer: for this reason, fill the reservoir with a quality cleaner, not just water. Replacing the blades on this model is simple thanks to the innovative attachment system: just lift the arm, press the two side tabs of the blade to slide it forward enough, then press the central lock to complete the removal. Finally, insert the new blade by sliding it until it locks into place.

Watch the video!


by ScegliAuto

More videos