Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide on How to Remove the Propshaft and Gearbox

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Drivetrain

The narrator explains the investigations carried out following the vibrations and jolts experienced during driving and confirms, after a thorough check, the good working condition of the entire gearbox assembly of his Panda, outlining the steps taken to establish a manageable work plan.
During the work, the cause is identified within the set of bearings and bushes present in the gearbox, as well as in the worn propshaft of the 4x4, which is not replaced for personal reasons.
The video concludes with the verification of the correct and improved functioning of the gear lever of the Fiat Panda 4x4 Trekking.

Updated on 2 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Video Guide on How to Remove the Gearbox
Video Guide on How to Remove the Gearbox
Fiat Panda (1980-2003 / 141, MK 1) This guide illustrates how to proceed with the removal of the gearbox. First, lift the car and place it on stable axle stands to avoid serious injuri…
Replacement of the gearbox side gaiter of the Fiat Panda 4x4
Replacement of the gearbox side gaiter of the Fiat Panda 4x4
Fiat Panda (1980-2003 / 141, MK 1) In today's video tutorial we will see the main instructions for disassembling and replacing the gearbox side gaiter of the Fiat Panda 4x4. As before,…
Replacement of the clutch of the Fiat Panda 1.4
Replacement of the clutch of the Fiat Panda 1.4
Fiat Panda (2003-2012 / 169, MK 2) Today's guide will show us the process of disassembling and replacing the clutch of the Fiat Panda 1.4. First, we open the hood and start by removing…

Other guides you may be interested in

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos